-
ACA RoQ - Roll hardness profiler
The roll hardness profile is an important parameter that defines a good roll. RoQ roll quality analyzer is the latest innovation in roll profile measurement. The RoQ automatically generates high-resolution, reproducible profiles with a simple measurement procedure.
Top 3 advantages of ACA RoQ
Cost savings through fewer complaints about roll quality
Identification of roll errors such as bagginess, rope marks, wrinkles and soft edges
Process control based on information from high-resolution profiles (online scanners cannot detect small variations reliably enough) -
Storage of results - quickly and easily, on a USB stick, without a PC and software. The moisture analysis by means of heating and extraction of moisture is a very accurate method for determining the moisture content of materials. This moisture measurement balance is very user-friendly and competitive in price.
-
Equinox analytical scales deliver remarkable precision. The Equinox is ideal for research and quality assurance; science education; precision weighing; and manufacturing applications that require exceptionally accurate results. Eight analytical models offer capacities from 120 g to 510 g and a readout accuracy of 0.1 mg. A color touchscreen provides intuitive operation, with icon-driven menus and easily accessible applications and functions. The five-inch screen is generously sized and offers a resolution of 800 x 480 pixels for excellent visibility. Level indicator and adjustable feet, for correct alignment for optimal weighing results. large stainless steel weighing platform for easy cleaning. RS-232 interface for fast connection to computers and printers. USB host for memory card.
-
The series includes 5 models with a weighing capacity of 80 to 250 grams. An efficient mechanism, plus improved electronics provide more consistent readings with up to 4 decimal places. USB and RS-232 interfaces provide fast communication with computers and printers Applications: • Weigh • Counting parts • Weighing percentage • Dynamic / animal weighing • Density determination
-
Versatile moisture meter. Ideal for measuring moisture in the walls of a boat, camper or caravan. Adjustable alarm for when the permitted moisture content is exceeded. The Techscan offers the combination of innovative functions and simple operation. With the advanced RF technology, the TechScan quickly scans large surfaces for moisture concentrations. In hard to reach places you can easily measure the moisture percentage by using the "Hold" function.
-
Moisture problems? The HT-3000 helps you to control the quality and cost of the work to be performed. A practical instrument for controlling humidity and temperature. Using the HT-3000, together with one of our material moisture meters, puts the solution of moisture problems at your fingertips.
-
Moisture meter for cotton, wool, viscose and rayon, C-2000. An indispensable tool for, among other things, the harvest, purchase and sale of cotton. Cotton that is harvested with the correct moisture percentage provides the longest and strongest fibers. This renewed moisture meter works on the basis of the ratio between the moisture content and the electrical resistance. This effectively measures the moisture percentage in the product. Handy due to the functional housing with handle and simple button operation. Equipped with a connection for electrodes for different applications.
-
Used worldwide for moisture measurement, the P-2000 Delmhorst moisture meter for paper and cardboard.
Ideal moisture meter to quickly and moreover measure moisture in paper, cardboard and bales of recycled paper. Measuring moisture with the standard pins in the material surface or with specific electrodes for various applications.
Moisture measurement in roll cores, books, packs of paper and cardboard, loose sheets, bales of paper, waste paper, etc. In addition to moisture measurement in paper and cardboard, this paper moisture meter is often used for moisture measurement in recycled paper. -
grain moisture meter for field, harvesting and pre-storage use of grain and seeds. Works with minimal sample quantity. With optional external electrodes for moisture measurement in hay and straw. Automatic or manual temperature correction. Ice lines for barley, coffee, corn, flax, hay, oats, canola, pasta, unprocessed rice, sorghum, soybeans and rye.
-
Wood moisture meter, handy, simple operation Moisture meter for wood workers and processors. Characteristics: 5-60% measuring range, depending on wood type and temperature. 69 calibration lines for a variety of types of wood. Clear display of the measurement results, storage of measurement results with date and time, etc. For professional use, also for controlling drying processes.
-
ProScan, the ideal non-destructive moisture meter for moisture measurement in various types of wood and other building materials.
The pinless Delmhorst moisture meter quickly and accurately scans walls and floors without damaging the surfaces. The ProScan Pinless Moisture Meter is used by building inspectors and restoration companies to accurately measure moisture content in materials such as wood, drywall, siding, tile and plaster. ProScan is used to determine whether the drying process has progressed sufficiently. Is there water damage? ProScan checks where there is excessive moisture in the foundation, walls, ceiling or roof to prevent mold, rot and decay. With a moisture measurement depth of 19mm and built-in corrections for wood species with a specific weight between 0.30 and 0.80, the moisture percentage can be determined quickly and accurately. Order your moisture meter now or contact us directly for more information! -
Genlab produces conveyor belt and tunnel ovens that are built to meet the highest standards. Within an environment where time is scarce and process control is required. A full design and build facility is available to provide cost-effective solutions for customers requiring rapid throughput and an automated handling system.
-
Continuous measurement of the air permeability and / or thickness of fabrics, non-wovens, felts, films and screeners on the moving material directly in the production line. Special features
-
-
- Wide measuring range: air permeability: 1 - 5,000 mm / s (0.2 - 1,000 ft³ / m² / min), thickness: 0-6 mm.
- High measurement accuracy.
- Measurement of cross profiles, length profiles and zigzag profiles.
- Measurement speed up to 200 m / min (660 ft / min). (!)
- High resolution, up to a measuring point of 1 mm.
- Modular system. Easily adaptable to the requirements of the production line.
- Calibratable.
-
-
-
The Highland® offers advanced features in a compact, durable balance that stacks for easy storage. Suitable for many tasks, Highland provides fast, accurate weighing in a number of different environments – from science research in the laboratory or field, to manufacturing operations. Sturdy ABS construction allows the Highland to stand up to demanding lab use, while Highland's ShockProtect® offers advanced overload protection to keep the balance safe. HandiCal® facilitates internal calibration without the need for external weights. Key Specifications Capacity: 120g to 6000g Readability: 0.001g to 0.1g Features and Benefits Hardware
- Balances stack efficiently and safely to save space (120mm pan size only)
- Colour-coded keys facilitate quick recognition of the most frequently used buttons
- Dual tare keys operate with either the left or right hand
- Level indicator and adjustable feet ensure proper balance setup for optimum weighing results
- Security slot for optional Kensington-type lock and cable to help prevent theft
- Large, grade 304 stainless steel pan allows easy cleaning
- Solid ABS housing is durable for industrial use
- Three-point ShockProtect® feature helps prevent overload damage to internal components
- Hook included for weighing below the balance
- HandiCal® internal calibration eliminates need for external weight set
- USB and RS-232 interfaces provide speedy communication with computers and printers
- Audible overload alarm warns when capacity is exceeded
- External calibration allows for verification and adjustment with weights
- Selectable digital filtering helps minimise effects of vibration and disturbances
- Parts counting with preset sample sizes Memory accumulation totals results
- Zero-tracking feature ensures display returns to zero reading
- Vivid, backlit LCD easily visible in any lighting conditions
- Programmable backlight can be set to "always on," "always off" or "light only when weighing"
- Capacity tracker built into display for easily monitoring possible overloads
- AC adapter included
- Rechargeable battery included for operation almost anywhere
- Programmable auto power-off to save energy
-
Handy pocket size! 66x32x128 mm. Weighs only 200 grams. Measure the pick count of fabric and mesh and the loop density of knits. Up to a speed of 40m / min, it is possible to measure moving material in the chain direction. The ideal inspection tool for buyers, laboratory technicians, quality controllers and production employees. Characteristic features:
- Large measuring range, 8 to 300 / cm.
- Measures accuracy better than ± 1%.
- Measurement time, faster than 1 second.
- Handy pocket size, suitable for use in laboratory and production environment.
- PC connection for for optional EVA software.
- Worldwide unique instrument.
- Includes ISO-compliant certificate and a calibration plate for calibration check.
- Standard battery power. 2x 1.5V, type AA. Adapter available as an option.
-
ACA RoQ - Roll hardness profiler The roll hardness profile is an important parameter that defines a good roll. RoQ roll quality analyzer is the latest innovation in roll profile measurement. The RoQ automatically generates high-resolution, reproducible profiles with a simple measurement procedure. Top 3 advantages of ACA RoQ
- Cost savings through fewer complaints about roll quality
- Identification of roll errors such as bagginess, rope marks, wrinkles and soft edges
- Process control based on information from high-resolution profiles (online scanners cannot detect small variations reliably enough)
-
Color meter with camera technology.
Application- Color measurement within the framework of product improvement.
- Color control to control the production process.
-
VERVIDE maintenance and service for a sustainable and standards-compliant use of your equipment for color assessment and product control.
You have purchased your Verivide light box to assess your products on color and / or quality. To this end, the light boxes are equipped with light sources that must meet specific requirements for color assessment. Through use, the lamps gradually lose their light intensity, so that after a certain period of time they no longer meet these requirements. To keep your Verivide light box in good condition, you should periodically:- the fluorescent (TL) and, if applicable, the halogen lamps (type A or H) should be replaced.
- The white lamp reflector needs to be cleaned.
-
This CCC range of daylight cabinets from Verivide are designed for the graphics and printing industry. They provide a standard environment for color evaluation, ink quantity control and dot density control. The unique concave back walls of these light boxes have a neutral gray color. The matte finish eliminates glare and reflection, and allows accurate color and quality control. These daylight boxes meet the standard specifications of BS 950 Part 1, Part 2 and ISO 3664. The light boxes are ideally suited for applications where a large assessment area for color or printing control is required.
-
Universal instrument for the determination of micro-mechanical properties of materials and surfaces. Analysis with sub-micrometer accuracy of the micro-mechanics, micro-tribologic and functional properties of materials. Determinations of wear, scratch resistance, micro-friction, structure and haptic properties. The scope of application of the UST® is not limited to just plastics, paints, coatings and prints. Instead, metal, ceramics, textiles, rubber and in medicine, for example, human material, have also been carefully measured, evaluated and classified
-
EV 03, compression set, according to ISO 815. The set consists of 2 round polished stainless steel discs with a central screw and spacer. Minimum number of components for easy sample placement. Spacers for large and small samples are included. A set of spacers from 1 to 20 mm in 0.5 mm steps is available as an option.
-
Gehman tester, computer controlled with 6 test stations. The Gehman test is performed according to ISO 1432, ASTM D1053 method A, or technically comparable standards. The computer monitors both the liquid heating and the measurement of the torsion angle of the samples. The results are graphed and the RM2, RM5, RM10 and RM100 values are calculated. The results can also be shown in a table. Vessels for storage of liquid nitrogen in the laboratory are available as an option.
-
Practical wear test method.
This multi-directional test method closely matches the wear and tear of elastomer components in a vehicle in the field, thus providing authentic and accurate results. This wear test complies with the specifications, in accordance with ASTM D8115 and PV 3984 (Volkswagen). Research has shown that, compared to the well-known ISO 4649, drum test, approx. 80% savings in costs and time. -
Rubber aging tests in air and liquids.
Aging tests for rubber and elastomers. Large capacity, 3 samples can be tested in each of the 24 test tubes. High temperature accuracy Temperature range: + 40 ° C to + 200 ° C (EB 11) + 40 ° C to + 300 ° C (EB 11HT) A few features:- Aging tests in air and liquids.
- Temperature stability in time and space, ± 0.25 ° C
- Temperature control by sensor in test tube
- Temperature control accuracy, 0.1 ° C
- Power failure recording.
-
For stress relaxation tests in a temperature range up to 200 ° C, or optionally up to 300 ° C, the test frames are used in combination with the cell ovens. Options such as multiple samples in one temperature, as well as in different temperatures, are available. Various rigs for testing in pull and push force, and in air or in liquids.
-
TAPERADER® is a mobile measuring instrument and provides real-time, reproducible measurement results of surface wear resistance through a method known as micro grinding. This pocket-sized tribometer (TAPERADER) can be used almost anywhere and offers fast and accurate assessment of:
- material surface
- coatings
- paint systems
- etc. the TAPERADER, tribometer, offers two measuring methods:
- During a measuring period, adjustable from 60 to 20 sec., An abrasion operation in the μm range is performed, it is recorded and immediately displayed as an a nm value.
- Determining the time during which, for example, a wear depth of 2 μm is reached and displayed as a result.
-
Practical rubber wear test method.
This multi-directional test method closely matches the wear and tear of elastomer components in a vehicle in the field, thus providing authentic and accurate results. This wear test complies with the specifications, in accordance with ASTM D8115 and PV 3984 (Volkswagen). Research has shown that, compared to the well-known ISO 4649, drum test, approx. 80% savings in costs and time. -
The AquAbrasion is an accurate and repeatable way to conduct wet wear tests, which we have proven to be a critical and often damaging step in determining outdoor wear durability. Deionized water can be used to replicate rain, or a sweat solution can be used to replicate sweat. Fabrics exposed to wet conditions are found to wear out more than when subjected to the same abrasive stresses under dry conditions circumstances.
-
The ABREX® simulates the testing of wear, by hand use or hand contact, on coating and printing of products, regardless of their shape, structure or material (plastic, metal, leather, etc.). With the ABREX® force and contact angle, in combination with standardized test materials and liquids, but also hand creams, lotions, (artificial) perspiration, cleaning agents, etc., are simulated. The ABREX® offers the possibility to simulate, for example, the complex visco-elastic method of hand use, including chemical reactions.
-
The IdentiPol QA offers a new measurement technique with which incoming materials can be determined whether they deviate from a reference database. Among other things, melting point, glass transition point and dynamic mechanical properties are screened with this system. The obtained viscoelastic fingerprint of the test sample is compared with the reference database; a deviating sample gets a low QIS score and can thus be easily recognized and rejected. The system includes a standard database. It is also suitable for glass-filled and hygroscopic materials. A granulate grain, powder or piece of product can be taken as a sample. The IdentiPol QA works with English software under Windows XP, VISTA and Windows 7.
-
The Core® is an excellent value, offers simple operation and is a portable solution for all basic precision weighing tasks. An innovative stackable design saves space, so the Core® lends itself well to science classrooms or busy laboratories. One of the most common applications is determining the M² weight of textiles / fabrics. The Core® includes a convenient weigh-under hook, which facilitates weighing under the balance for tasks requiring density and specific gravity measurements. Features and benefits Hardware
- Color-coded keys enable quick recognition of the most commonly used buttons
- Dual tare keys work with the left or right hand
- Security slot for optional Kensington-type lock and cable to prevent theft
- Large 304 stainless steel pan allows easy cleaning The robust construction can withstand industrial use
- Three-point ShockProtect® feature helps prevent overload damage to internal components
- Includes hook for weighing under the scales
- Detachable windshield (pan size 120mm and 160mm only)
- Automatic shut-off to save energy
- Audible overload alarm warns when capacity is exceeded
- Zero tracking function causes the display to return to zero
- Vivid LCD with backlight, easily visible in all lighting conditions
- Programmable backlight can be set to "always on", "always off" or "light only when weighing"
- Operates on AC adapter or batteries (not included)
-
Crack test, digital Elmendorf. Versatile and powerful. Meets all standards for tear testing of textiles, paper, non-woven and plastic film and foil. This Elmendorf, has a contemporary styling and offers a wide range of new functions that offer real advantages, such as reliable test results, high accuracy, safety and flexibility.
-
ACA RoQ - Roll hardness profiler The roll hardness profile is an important parameter that defines a good roll. RoQ roll quality analyzer is the latest innovation in roll profile measurement. The RoQ automatically generates high-resolution, reproducible profiles with a simple measurement procedure. Top 3 advantages of ACA RoQ
- Cost savings through fewer complaints about roll quality
- Identification of roll errors such as bagginess, rope marks, wrinkles and soft edges
- Process control based on information from high-resolution profiles (online scanners cannot detect small variations reliably enough)
-
Thickness measuring device, standard compliant for various materials. Measuring range optionally up to 10 mm, 25 mm or 50 mm.
- Resolution of your choice, 0.001 or 0.01 mm
- Measuring depth (center of base) 110 mm
- Illuminated graphic touch screen. Menu-driven operation (optionally in German or English)
- Single measurements and measurement series with adjustable number of measurement cycles
- Always up-to-date and simultaneous display of measured value, measuring cycle, mean and standard deviation
- Automatic zero point control
- Adjustable measuring time, from 1 - 60 seconds
- Motor driven constant speed foot movement. (standard 2.5 mm / s)
- Time-saving pre-settable measuring path
- Digital interface
- Footswitch operation
- Software
-
Characteristics:
- Fully automatic operation.
- Great capacity.
- Remote control and monitoring by VNC (Virtual Network Computing).
- Climate control independent of compressed air quality.
- High-quality weighing module (Mettler-Toledo).
- Easy calibration of the weigh module.
- Exchange program for sensors
- Negligible air consumption.
- No PC required for use.
- Sample cups with quick-release clamp ring.
- Exterior of the measuring chamber heated - no condensation in case of power failure.
-
Also for mouth masks tests according to EN 14683, appendix C. Recently adapted for the fully automatic course of this test. Also for technical textiles. Can be used in the laboratory and the production process. Textest has established itself worldwide with its air permeability measuring equipment. Already 50 years of experience, know-how and development in measurement of air permeability is the basis for this. The Multi-functional Labair IV meets all requirements when it comes to the air permeability of your products.
-
Thermal conductivity range: 0.01 to 500 W / mK Thermal diffusivity range: 0.01 to 300mm² / s The system includes: - Trident Thermal Property Analyzer Electronic Control Unit - Standard Laptop with Windows 10® Operating System - Small Volume Test Cell - Pelican ™ Transport case - C-Therm TC3 ™ Software License Modified Transient Plane Source 1 × MTPS Sensor - Thermal conductivity: 0.01 to 500 W / mK (Max-k) - Temperature: -50ºC to 200ºC (optional up to 500ºC) - Test materials: solids, liquids, powders, pastes Reference Material: Expanded Polystyrene (EPS), LAF6720, Pyrex, Pyroceram, Phosphate Bronze, Copper Transient Plane Source 3 × Flex TPS (hot disc) Kapton based sensors - Thermal conductivity: 0.03 to 500 W / mK - Temperature: -50ºC to 80ºC (optional up to 300ºC) Reference material: stainless steel 304 (x2) Transient Line Source 1 × 150mm TLS Needle Probe - Thermal conductivity: 0.1 to 6 W / mK - Temperature: -55ºC to 200ºC - Test material: viscous / viscous liquids, non-consolidated solids, molten polymers Reference material: Glycerine Climate cabinet is available separately.
-
Household tumble dryers do not consider the requirements of a textile testing laboratory. For obvious reasons are the variations in the performance of the different models and brands. The consistency and reproducibility of the set values, such as time and temperature, are also not checked. In response to these challenges, James Heal developed the Accudry. An air-ventilated, reversing dryer, which keeps machine variables and operating errors to an absolute minimum. The Accudry meets the current European requirements for tumble dryers in textile test laboratories. Most important features:
- Guaranteed in accordance with the standards
- Multilingual control panel
- Precise control of heating and cooling periods
- Precise control of the outlet air temperature
- Dual filter system
- Robust and long-lasting
- Service and calibration facilities available
-
Accelerated washing tests for wear behavior of clothing. Several properties can be tested, such as the durability of prints or flakes, shrinkage differences in the same surface, wrinkling, puckering, etc. The Dynawash has two versions, with and without an integrated centrifuge. Both machines are operated via the intuitive touch screen which makes it easy to set temperature and time cycles.
-
Crockmeter, rub test Crockmeter, for rubbing tests, dry and wet, to check color fastness. In addition to textiles, the Crockmeter is used for color fastness, rubbing tests on carpet, laminate wallpaper and printed matter. Also for microscratch resistance of lacquers, coatings and painted surfaces. If you have a special application, please get in touch to discuss the possibilities with us.
- smoothly working, due to precisely designed mechanism.
- built-in digital counter with battery power.
- guaranteed accuracy of test pressure and stroke length
- sample clamp in polycarbonate, easy to install
- in accordance with, among others, EN ISO 105 X12, AATCC 8 and Marks and Spencer C8 Also available in version with motor drive for endurance tests.
-
Specially designed for testing textiles, non-woven and leather in various forms: yarns, fabrics, clothing and the safety of accessories. The combination of technical innovation and intuitive contributions from users has led to the realization of this user-friendly test device. With the intelligent and easy to use "TestWise" software you can get started with 3 clicks. The extensive library of test routines, together with the wide variety of clamps and grippers, make it possible to test according to a large number of international and customer-specific standards. A few features: Wide range of clamping tools for custom and standard test routines Rapid change of clamping pieces and power cells Testwise software with an extensive file of pre-programmed test methods
-
Cup washing machine for color fastness testing. This cup washing machine is used for evaluation of color fastness of textiles and leather, for dry cleaning and washing in standardized soap liquid, chlorinated water, etc. The Gyrowash 815, cup washing machines confirm everything that is synonymous with James Heal instruments: innovative engineering, versatility, ease of use, affordability and last but not least, longevity. Within the Gyrowash range there are 2 models, with the flexibility for small and large sample cups: Gyrowash 815/8 - 1 bath With a maximum capacity of 8 large or 8 small test cups. The most affordable single bath Gyrowash. Ideal for laboratories performing low-volume wash and dry cleaning tests for color fastness to European and American standards. Gyrowash 815/20 - 1 bath An officially recognized AATCC test instrument (AATCC Test Method 61.) The horizontal rotor accommodates five test cups on each of the four sides. So a maximum capacity of 20 large (1200ml) or 20 small (500ml) cups, or a combination of these.
-
TruRain is an automated and programmable rain simulator. This determines to what extent textile repels water. In short: It is the ultimate Bundesmann tester. Designed with precision in mind to reduce inconsistency and improve results accuracy. Big advantage over existing Bundesmann testers? TruRain has an automatic 'Shower guard'. This keeps the person performing the test always dry when inserting and removing the test heads. These test heads can be easily removed individually (which was not possible until now), so you also need less space for the set up !. In addition, the TestWise software is very user-friendly, it partly automates the test process and warns the user based on the set ISO standard.
-
ProDry provides insight into evaporation and how garments such as active wear dry when they have become damp due to rain and perspiration. ProDry reproduces the conditions to check that quick-drying fabrics are performing effectively. ProDry provides insight into evaporation and how garments such as active wear dry when they have become damp due to rain and perspiration. ProDry reproduces the conditions to check that the quick-drying fabrics are performing effectively. The software with pre-programmed parameters automatically recognizes the end point of the test and calculates the test results. During the test, test values are displayed progressively and in real time on the screen. In addition, more measurement points can be added to the results, which contributes to a higher accuracy and consistency of the test results. With the adjustable temperature sensor, the AATCC standard is met regardless of the thickness of the test material.
-
CHARACTERIZED BY SIMPLICITY….
- Ergonomic design.
- Operation with minimum skill level.
- Pre-programmed test routines.
- Changing test material is a second's work.
- 3-sided holders for test material.
- Attachments for quick assessment of test results.
- Xenon lamp installation without tools.
- Accessible water tank of 32 liters, or direct connection to existing purified water system.
-
WickView is a state-of-the-art measuring instrument for tracking and registering moisture transport in a garment. The advanced imaging system provides a good picture of moisture absorption and drainage, and as such, the effectiveness of these properties in a garment can be determined. The ability to rotate samples in both vertical and horizontal position faithfully simulates the wearing of clothing on the body.
-
EN 16603, EN 16604, ASTM F 1670 and ASTM F 1671. Newly developed due to the high demand for testing according to the above standards. With this new instrument, up to six penetration cells can be connected simultaneously. The pressure sequences can be selected according to the standards or they can be freely programmed. In addition, a 100 cm2 test head can be added to perform regular water column tests up to 500 mbar.
-
For rubbing tests to check color fastness. In addition to textiles, the Crockmeter is used to measure color fastness to friction on carpet, laminate and printed matter, as well as the microscratch resistance of lacquers, coatings and painted surfaces. If you have a special application, please get in touch to discuss the possibilities with us.
- smoothly working, due to precisely designed mechanism. Adjustable digital return counter.
- guaranteed accuracy of test pressure and stroke length
- sample clamp in polycarbonate. In accordance with, among others, EN ISO 105 X12, AATCC 8 and Marks and Spencer C8 Also available in manual version for standard testing.
-
Fluctuations in the water potential imply changes in growth, proteins and photosynthesis. Plant water stress is affected by four environmental factors:
- soil moisture
- humidity
- wind
- direct sunlight or heat exposure While most control systems only test for the effect of one of these factors, the ARIMAD water potential meter checks for the effect of all these factors, through a direct plant-based measurement
-
A wide variety of plastic powder, granulate, film, and even thermoplastic foam can be tested. The absolute moisture content is analyzed by a chemical method rather than weight loss during heating. Calibration before measurement is unnecessary with the FMX HydroTracer.
-
The “blue wools”, or blue wool standards, are used in the testing of lightfastness, for example in Xenon test equipment. These ISO standards (ISO 105 B08) are from the DEK (Deutsche Echtheitskommission). The DEK is the leading standard for Blue Wools worldwide, and every batch produced is checked for compliance with this standard before release. If desired, the comparative test results are available.
-
This Hardness Meter, or durometer, is used for fast and convenient determination of the hardness of warper beams, yarn cheeses and fabric packages in warping, spinning, winding and dyeing. By means of two optional test bodies the instrument is suitable for delicate test specimens (L 5700-DEL) and extremely hard test specimens (L 5700-HRD).Therefore, it can handle the entire range from soft dyeing packages through hard filament yarn warper beams.
-
With a high-resolution graphic display and intuitive functions, Solis analytical scales offer an excellent solution for laboratories. The Solis is ideal for research and quality assurance laboratories; science education and manufacturing applications that require precision results. Users can easily view the comprehensive data on the generously sized graphic display. A multilingual display allows the use of the balance in different regions. The Solis can store up to 99 materials. Key specs: Capacity: 120g to 510g Readability: 0.01mg / 0.1mg to 0.0001g Features and benefits Hardware Level indicator and adjustable feet ensure correct balance setting for optimal weighing results Security slot for optional Kensington-type lock and cable to prevent theft Large stainless steel 304 stainless steel pan allows easy cleaning RS-232 interface is available for quick connection to computers and printers Software External calibration ensures verification and adjustment with weights Selectable digital filtering helps minimize the effects of vibration and interference Printouts include date and time for record keeping within Good Laboratory Practices (GLP) guidelines Multilingual display allows use in many different countries Checkweighing with audible alarm Counting parts with preset sample sizes Screen High-resolution graphic display is spacious enough for clear view
-
The Genlab range of soil drying ovens offers a selection of highly efficient, reliable and cost-effective models to meet most material testing requirements. This range of ovens is designed for drying large quantities of soil and bulk samples and maintains temperature in accordance with BS EN and ASTM standards. They feature the latest touchscreen control system, which offers intuitive operation and excellent accuracy.
-
Genlab, cabinets for drying or heating glassware and instruments, blankets, electronics, etc. Range up to 70°C. Without insulation or with insulation for extra energy savings and improved efficiency. Available as standard non-insulated models and insulated versions, for better efficiency and cost savings. A touchscreen controller is also available as an option or upgrade on the isolated version.
-
The GENLAB silent water baths are economical, reliable in use and very cost-effective. They are supplied with a knob thermostat as standard, but if higher demands are made on accuracy, a PID Microprocessor digital controller can be used.
-
These moisture extraction stoves are specially designed for quick drying and removal of excess moisture, where standard stoves do not meet the requirements.
-
The GENLAB incubator and incubator combinations can be set to the desired temperature range by means of a high/low switch. Temperature range up to 250°C for use as an oven or sterilizer, and up to 100°C for use as an incubator.
-
Genlab's hot air sterilization ovens are used in many hospitals, laboratories, veterinary and medical clinics to sterilize surgical and cosmetic instruments, glasses and petri dishes. Hot air sterilization is a method of effectively killing all kinds of microbes, especially bacteria, viruses and fungi on heat-resistant materials. These ovens feature the latest touchscreen control system, which offers intuitive operation and excellent accuracy, and has an interactive timer system. This ensures that the countdown timer does not start until the set point is reached and pauses if the cabinet temperature falls below the set point. As such, sterilization time is always guaranteed, regardless of sterilization load and cabinet volume.
-
The GENLAB, Classic Series, offers a selection of highly efficient, reliable and cost effective furnaces for most drying, heating and general laboratory applications. The easy-to-use thermostat control is good for educational purposes and the stoves can be configured to suit individual requirements.
-
Made to the highest standards and packed with features and extras. As standard, the Prime range offers a heavy-duty stainless steel interior, increased accuracy and responsiveness. This range offers more payload, multiple reinforced shelves and operates continuously at 300ºC. The touchscreen control offers intuitive operation, designed for industrial and laboratory applications. Historical trend on the screen (48 hours) Count down timer 24/7 real-time clock control Manual or automatic reset of the overheating High Accuracy Pt100, Duplex Sensor <0.6ºC Mechanical circulation Excellent stability <+/- 0.5ºC Excellent temperature uniformity Short response time
-
The GENLAB large volume stoves are cost-effective, accurately controllable and versatile. Designed for drying, curing and more general testing of and on large volumes of sample material in the laboratory and industrial environment.
-
Genlab, large volume incubators, are energy efficient and versatile. i.a. for research and analysis in the laboratory. These incubators are also ideally suited for preheating raw materials in the production process. Customization is also possible. The temperature range is standard up to 100°C, but can be adjusted on request.
-
Manufactured to the highest standards and packed with features and extras. As standard, the Prime range offers a mirror polished stainless steel interior and a temperature range of up to 100ºC. The touchscreen control offers intuitive operation, designed for laboratory incubators.
- Fluctuation +/- 0.15°C at 37°C
- Historical trend on the screen (48 hours)
- 8 Step Profile Check
- Count Down Timer
- 24/7 real-time clock control
- Increased ramp/recovery times
- Manual or automatic reset of the overheating
- High-precision Pt100A duplex sensors <0.6ºC
- Mechanical circulation
- Excellent stability <+/- 0.5ºC
- Excellent temperature uniformity
-
Standard lighting conditions are essential for optimal, consistent color assessment and quality control of your products. The Verivide CAC 150 light box provides these optimal conditions for assessment of virtually all materials and products. Can be used for, among other things, assessment of color quality, color fastness, test results and metamerism. All light sources have a very high color rendering index "CRI".
-
The Verivide light box, type CAC 120, offers optimum conditions for color control on practically all materials and products. Daylight and other standard light bulbs are essential for reliable, consistent color assessment and quality control of your products. Can be used for, among other things, color comparison, assessment of color fastness and metameric control. All light sources have a very high color rendering index "CRI".
-
The CAC-LED 60 light box is the smallest model in this series from VeriVide. Equipped with LED lighting. In addition to daylight, there is a choice of 3 or 4 other light sources. A standard lighting environment is essential for optimal color assessment and control of materials and products. This VeriVide light box also meets the guidelines for equipment for color and product assessment, for uniformity, color fastness, metamerism and test results. All light sources have a very high color rendering index "CRI".
-
The CAC-LED 120 light box is the smallest model in this series from VeriVide. Equipped with LED lighting. In addition to daylight, there is a choice of 3 or 4 other light sources. A standard lighting environment is essential for optimal color assessment and control of materials and products. This VeriVide light box also meets the guidelines for equipment for color and product assessment, for uniformity, color fastness, metamerism and test results. All light sources have a very high color rendering index "CRI".
-
DigiEye is VeriVide's unique, groundbreaking digital system for non-contact imaging and assessment of both the color and appearance of any type of sample. It has a huge number of potential applications in the textile and apparel sector, where DigiEye is already widely used and specified by major retailers. Among its many advantages, DigiEye offers complete objectivity, accuracy, consistency and repeatability. It 'sees' color the same way humans do - targeting the elements that external elements such as packaging or labels need to assess and filter out. Data processed by DigiEye may also be sent in real time to one or more other DigiEye systems, located anywhere in the world. This can directly lead to very significant cost-saving global supply chain efficiency. Examples of products and materials that can be quickly and accurately assessed by DigiEye include: Denim Rugs Patterns and prints Lace and lingerie Coordinated Sets - including combinations of 'soft' and 'hard' goods traded together. VeriVide has introduced v.6 of DigiEye's 'cube', which includes further improvements and refinements such as a larger opening for easier access and bulkier items, and all-metal soft-closing sliding mechanism. It can also be removed to facilitate cleaning or maintenance. All this ensures more durability and faster and more efficient operation.
-
The TRACEiT® measures 3-D topography, roughness values, Ra opt, Rq opt, Rz opt, and documents the visual perceptions as seen by the human eye. A patented and portable system for non-contact and high-quality measurements and analyzes of surfaces, both on outdoor locations and in the production line. TRACEiT® is the first system in the market with which visual impressions and external characteristics can be reproducibly evaluated, analyzed and documented.
-
Temperature cabinet for testing in a standard ambient temperature of 23ºC, ±0.5ºC. Up to 4 test frames can be placed in the cabinet.
-
Airtight container for testing in liquids. This container is used in combination with the test frame EB 02 and is suitable for a pressure of up to 3 Bar. For example, samples in coolants can be tested under pressure. When testing in volatile substances, evaporation is prevented, reducing the risks of explosion. The container is equipped with a safety valve, which is set at approximately 3 Bar.
-
Elongation test, according to ISO 2285. This stainless steel set can be set for 25% to 100% elongation and is easy to place in the sample holder of the cell ovens.
-
Electrical resistance measurement according to ISO 2878. For conductive and antistatic rubber products. This instrument has a battery-powered megaohm meter, which measures test voltages from 250 VDC to 1000 VDC, using insulated stainless steel electrodes. Includes pen with conductive silver paint and 1 liter of conductive liquid.
-
Easy and time-saving. During assembly of the samples for aging tests in a cell oven, this standard offers many advantages. Place the sample holder in the stand, and you have both hands free to place up to 24 samples.
-
TR tester with automated test procedure. After cooling the liquid, the computer monitors the heating and measures the change in length of the samples. The result is displayed as TR10, TR30, TR50 and TR70. The result can also be shown in a table with length versus temperature. The test results can be exported to a spreadsheet for graphing. We recommend the use of an automatic liquid nitrogen cooling system.
-
Heat aging tests according to ISO 188 method B, and ISO 4577. Oven with high air speed and with a laminar air flow from bottom to top. An error of 1°C in temperature corresponds to approximately 10% error in test time, so temperature accuracy is very important for heat aging testing.
-
Heat aging testing of rubber in liquids and air This tube furnace has four compartments for simultaneous testing in different temperatures. Capacity, 6 test tubes per cell. High Temperature Accuracy Temperature range: + 40 °C to + 200 °C (EB 11) + 40 °C to + 300 °C (EB 11HT) A few features: Testing in liquids and air. Temperature stability in time and space, ± 0.25 °C Temperature control by sensor in test tube Temperature control accuracy, 0.1 °C Display in case of power failure.
-
This cabinet oven for aging tests features excellent temperature stability and air distribution, which is controlled by the controlled airflow. The test oven is available in 60 and 120 liters. The EB 10-II is ideal for aging testing with finished products and large test samples, which are not suitable for testing in a cell oven. Both shelves and rods are included, so that practically all sample types can be tested.
-
Cell oven for life and aging testing of rubber and plastics in strictly controlled conditions. The EB 01 complies with the specifications described in the standards, ISO 188, ISO 3383, IEC 811 and technically equivalent standards. The EB 01 Cell oven has 4 cells with individually adjustable air exchange.
-
Cabinet oven, type EB 04-II, with aging test device. Meets the specifications of, ISO 188, IEC 811 and technically equivalent standards. This aging test oven offers test conditions such as very small temperature variation in time and space, low air velocity and controlled air exchange rate. For this, the oven is equipped with an inner chamber with a controlled air speed. The EB 04 is ideal for aging testing of finished products and large test samples, which do not fit in the cell ovens. Delivery includes shelves and rods for testing practically any type of sample.
-
Pressure test device. PC controlled, for stress relaxation measurements, specially designed for discontinuous measurements on rubber in accordance with ISO 3384 method B and standard pressure testing
-
Material: All materials, alle products Application: Moisture measurement in materials and products Brand: Delmhorst -
The JL-2000, is ideally suited for quality control in tanneries. The moisture content in hides is an important factor in all phases of the processing process. This moisture meter is therefore an indispensable tool for the production of high-quality end products. The optional 4-pin type 4-E electrode offers an even higher measurement accuracy.
-
A powerful portable measuring instrument with innovative sensor technology. A few features: Fast acclimation Durable stable sensor Simple data storage Analysis available via PC and printer Optimal documentation of your quality Menus in English, German, French and Italian
-
Accurate moisture meter with memory. With cable connection for: 1. Pitch sensor for measurement in bales or bulk goods or 2.Sensor for relative humidity and temperature Optional - PC connection, software and printer The RH2 offers: Relative (air) humidity, absolute humidity, dew point, Residual moisture content in %, and aw value (water activity) Durably stable sensors Simple data storage in a portable measuring device.
-
The HT-4000, a thermohygrometer for floor layers, restorers and contractors. The HT-4000's advanced RH/T sensor quickly takes over the ambient temperature and humidity. The sensor is detachable, making the HT-4000 ideal for measuring moisture in a concrete floor, according to the ASTM F2170 standard.
-
Moisture meter for moisture measurement in bales and fabrics and at every processing phase in between. Maximum accuracy. This moisture meter checks the moisture content in 0.1% steps in every fabric, from glass and polyester to cotton and wool. Each single substance or mixture has its own calibration factor. For natural and artificial substances. More than 170 different calibrations. Various electrodes for in-line, off-line applications.
-
Simple, fast and non-destructive moisture meter for in-situ moisture measurement in bales of recycled paper. With connection for optional stitch sensor for measurement in loosely stacked paper
Includes LogMemorizer. Manual storage and automatic data logging of up to 10,000 measurements with measurement report.Especially in bales of recycled paper there can be extremely high moisture differences. The RP6 makes it possible to measure the absolute water content of the paper within seconds.
The RP6 has a memory for storing approx. 10,000 measurements which can be documented and presented as proof of quality.
RP6 recycle paper moisture meter comes with rechargeable batteries, calibration certificate, USB data interface module with LogMemorizer software on USB stick incl. USB, cable for PC, in a plastic case.
-
Multifunctional moisture meter, for fast and accurate measurement of residual moisture in paper and cardboard. For moisture measurement in and on the material surface. Wide choice of specific electrodes for various applications such as measuring moisture in tubes, books, packs of paper and cardboard, loose sheets, waste paper, tubes, etc. Measurements are saved and can be recalled later. This moisture meter determines the residual moisture percentage by measuring the electrical resistance.
-
The F-2000H, hopmeter is a digital moisture meter for testing residual moisture in hops after harvest, during the drying process and during storage. The portable hop moisture meter has an accurate moisture measurement range of 7 to 23%. Several optional electrodes are available for specific applications. Contact us for a no-obligation advice.
-
This moisture meter has been developed on the basis of the handy and popular F-2000 and is specifically calibrated for tobacco. Choice of specific electrodes, depending on the process phase being measured. The F-2000T comes complete with case.
-
This handy moisture meter has a calibration line for reed, which is also used for reference measurements in plywood and fiberboard. The F-2000-R is available with different electrodes. The choice of electrode is determined by the application. Good contact between the electrode and the material is important. A combination of a handle and pin electrode, type 830, is used for measurements in reeds. The handle is screwed to the connection socket of the moisture meter with a plug. Alternatively, the pin electrode type 1235 can be connected directly to the meter. The electrode, type 2-E, is used for measurements in plywood and fiberboards.
-
C-2000, moisture meter for cotton, wool, viscose and rayon.
An indispensable tool for, among other things, the harvest, purchase and sale of cotton. Cotton that is harvested with the correct moisture percentage produces the longest and strongest fibres.
The renewed C-2000 works on the basis of the ratio between the moisture content and the electrical resistance. In this way, the moisture percentage in the product is measured in an effective way. Handy due to the functional housing with handle and the simple button operation. Equipped with a connection for various models of external electrodes.
-
The G-34, hopmeter is a moisture meter for testing residual moisture in hops, also ideal for moisture measurement in hop bales in a range of 7 to 14%. 2 optional electrodes are available for specific applications.
-
This portable digital soil moisture meter is compact and easy to use. In combination with the gypsum sensors, the presence and amount of moisture in the soil during planting can be monitored. This soil moisture meter offers the user the necessary information to make an effective irrigation plan. After connecting the sensor wires, the measurement result is immediately shown in the display. The measurement results can be converted to the amount of soil moisture or moisture tension using the supplied calibration curves.
-
Handy moisture meter for wood at an attractive price. Suitable for both the professional and the hobbyist with a unique LED display. A perfect solution for, among other things, checking the woodwork before painting or painting. For woodworkers, as furniture, instrument and frame makers, etc.
-
Easy to use. Fast result. This moisture meter with LED display is easy to operate and gives you accurate measurement results of the residual moisture in wood. A reliable moisture meter for installers, carpenters and craft woodworkers.
-
Versatile, non-destructive moisture meter. The Techscan combines simple operation with innovative functions. Ideal for moisture measurement in wooden frames, floors, rebated doors, and more. This moisture meter is ideally suited for checking and detecting leaks. With advanced RF scanning technology, moisture concentrations are quickly detected. The adjustable alarm signals if the permitted moisture content is exceeded. For measurements out of sight range, the 'Hold' function is used to hold the measurement result in the display.
-
ProScan, non-destructive wood moisture meter, quickly and accurately scans specific types of wood and other building materials. The Delmhorst pinless moisture meter is used by: floor layers installers furniture makers inspectors woodworkers carpenters anyone who works with different types of wood Determine quickly whether the moisture percentage in the wood has the correct value up to a depth of 19 mm. Measure easily and without damage whether the wood is ready for sale, has been sufficiently acclimatized, or is ready to be used. Pinless moisture meters are essential for checking finished products such as furniture, window frames and wooden floors. The digital non-invasive ProScan automatically corrects for various types of wood by determining the specific gravity and also has a reference scale for the other building materials. After water damage, ProScan quickly and accurately scans the walls, floors, ceiling and roof for a correct analysis and determination of the damage. Contact us now for more information about non-destructive moisture measurement. Our specialists are happy to advise you about the possibilities in moisture measurement.
-
This wood moisture meter earns its popularity due to its handy and simple operation. The result of the moisture measurement can be read immediately. An ideal moisture meter when processing or processing wood, e.g. for making furniture, stairs, window frames, etc. Moisture measurement based on resistance technology. Accurate and fast results. This wood moisture meter is equipped with standard pins, but can also be combined with a hammer (ram) electrode. In addition, you can choose from different electrodes for wood moisture measurement in almost every step of the wood processing process.
-
This moisture meter for building materials is ideally suited for monitoring during every step in the construction process. Also for moisture measurement when detecting moisture problems in existing buildings. Versatile moisture meter due to the availability of different electrodes for moisture measurement in various building materials. The BD-2100, digital moisture meter is easy to operate and comes complete in a sturdy carrying case.
-
Two-in-one moisture meter for quick scans of large areas and pin measurements for more in-depth investigation of moisture problems The TechCheck Plus offers the solution for moisture measurement in floors and walls. The calibration line for wood and the exclusive calibration for plasterboard are indispensable extras.
-
This moisture meter is characterized by versatility. Offers the combination of innovative functions and easy operation. Ideal for measuring moisture in floors and walls. With advanced RF technology, the TechScan quickly scans large areas and detects high moisture concentrations with an adjustable alarm. In hard-to-reach places you can easily read the moisture percentage by using the 'Hold' function.
-
All desired options in one moisture meter. For moisture measurement, with and without pins, for destructive and non-destructive moisture measurements. Moisture determination by means of a quick scan or an in-depth examination. For measurement of humidity and temperature. Navigator Pro offers the possibilities of measuring, registering and exporting 1400 moisture measurements, including the date and time and the specific location. Export the data to your PC for further analysis. Navigator Pro moisture meter the solution for every professional.
-
BD-10 analog moisture meter for moisture measurement in wood and building materials. Simple and efficient. Equipped with an analog display, the BD-10 is an interesting alternative to the digital BD-2100. The BD-10 Moisture Meter is the entry-level moisture measurement device and is ready to measure moisture content with just a single push of a button! With a calibration for wood, MC 6 – 40%, the moisture meter is ideal for measuring the moisture percentage in floors, beams, window frames and subfloors. With the reference scale of 0 – 100, the moisture meter is ideal for moisture measurement on other building materials such as concrete, plaster and insulation materials.
-
Gypsum moisture meter - specially developed for plaster, performed with no less than 3 calibration lines for moisture measurement in plaster walls and plaster products. The G-79 is equipped with an exclusive calibration line and extra large analog display for fast and accurate measurement results. Delmhorst offers a very extensive range of electrodes. We would be happy to advise you on the right electrode for your product or application.
-
TotalCheck 3-in-1 moisture meter is the most complete moisture meter you could wish for. Three measuring techniques in one tool: 1. Quick Scan 2. Pin moisture measurement 3. Humidity, Temperature, Dew Point and GPK calculation. In short, the Totalcheck moisture meter is an indispensable tool for professionals involved in finishing work in new construction projects, maintenance and renovation of existing construction objects, as well as for restoration and damage repair work. The RH sensor can be disconnected and used for moisture measurement in concrete floors. This method meets a new US standard, ASTM F-2170, which is used to assess whether concrete subfloors are sufficiently dry to be finished. E.g. applying coating or laying floor coverings.
-
QuickNav, Moisture meter for construction and restoration works. 3-in-1 moisture meter: Pin Moisture Meter Non-Destructive Moisture Scanner Thermohygrometer, Humidity (RH), Temp, Dew Point, etc. If you are looking for the versatility of a 3-in-1 moisture meter, but storage of the measurement results is not important to you, the QuickNav offers the solution! With this 3-in-1 moisture meter you can scan, take pin measurements and measure temperature, humidity. The dew point and weight of water per kg of air are also calculated. The name QuickNav describes exactly what this moisture meter has to offer. With the simple menu structure you can quickly navigate through the menu and discover the advantages of the 3 measuring functions of this moisture meter. Water damage companies, restoration specialists and homeowners know that using a reliable moisture meter is essential to pinpoint moisture problems and monitor the drying process.
-
TAPERADER® is a mobile measuring instrument that provides real-time, reproducible measurement results of the wear resistance of surfaces through a method known as micro-grinding. This pocket-sized tribometer (TAPERADER) can be used almost anywhere and provides fast and accurate assessment of: Material surface coatings paint systems etc. the TAPERADER, tribometer, offers two measuring methods: A wear operation in the µm range is performed over a configurable measurement period from 60 to 20 s, and is recorded and immediately displayed as an a nm value. Determining the time in which, for example, a wear depth of 2 µm is reached, and displayed as a result.
-
The circular motion of the machine creates multi-directional scratches, making the results more representative of the actual end use than other methods in the market, which only scratch in a straight line. This test move is also suitable for testing according to EN 438-2:2016, CEN/TS 16611:2016 and IKEA
-
The AquAbrasion is an accurate and repeatable way to perform wet wear testing, which we have proven to be a critical and often damaging step in determining the durability of outdoor wear. Deionized water can be used to replicate rain, or a sweat solution can be used to replicate sweat. Fabrics exposed to wet conditions are found to wear more strongly than when subjected to the same abrasive stresses under dry conditions circumstances.
-
The ABREX® simulates the testing of wear, by hand use or hand contact, on coating and printing of products, regardless of their shape, structure or material (plastic, metal, leather, etc.). The ABREX® simulates force and contact angle, in combination with standardized test materials and liquids, but also hand creams, lotions, (artificial) perspiration, cleaning agents, etc. The ABREX® offers the possibility to simulate, for example, the complex viscoelastic methodology of hand use, including chemical reactions. https://youtu.be/p9PBLnsv3hY
-
These tests are performed on materials and compositions of materials, intended for heat protective clothing. Method A is used for visual assessment of material change. Method B determines the protection level of a material. One or both of these methods are used for these materials. Supplied as standard with software for logging the test data in Excel format, or optionally with ArtTest software for standard-compliant calculations and result display.
-
Applied to materials for heat protective clothing, when exposed to fire. Fully complies with the specifications described in the ISO 9151: 1995 standard. A method of comparing or indexing the heat transfer representative samples of one or more layers of textile or other material for heat protective clothing. Supplied as standard with software for logging the test data in Excel format, or optionally with ArtTest software for standard-compliant calculations and result display.
-
Measurement of the resistance to permeation of liquids in materials, eg textiles, nonwovens and films (with and without coating). This water column test is easy to perform and provides accurate, reproducible information about the permeability of your materials. Three tests, the dynamic, static and program test mode. Your choice: manual, semi-automatic or - unique worldwide: - fully automatic test procedure without the presence of the operator. Choice between three models: FX 3000-4L PUM, test pressure up to 500 mbar (5 m water column) with built-in pump and mechanical sample clamp. FX 3000-4M, test pressure up to 2,000 mbar (20 m water column) with external compressed air connection and pneumatic sample clamp. FX 3000-4H, test pressure up to 5,000 mbar (50 m water column) with external compressed air connection and pneumatic sample clamp. Characteristic features: Time-saving features, such as adjustable alarm value, automatic program flow during "pass/fail" tests and an optional automatic drop detector. Well lit test area with unobstructed view of the test sample. Quick and easy clamping of the test sample. Touch screen operation with digital and graphic display of the test results and the test sequence. Data transfer: via USB, Ethernet Operates in accordance with all major testing standards. Calibratable. Options: Automatic water level control WLAN for direct access to the network. Integrated software for evaluation and storage of test results in XML format. Integrated strip printer for printing a test report.
-
Wrinkle Recovery Tester or Wrinkle Recovery Tester Determination of wrinkling behavior of textiles. The test sample is wrinkled by a standard method. Different weights are used for this. Test for both fabrics and knits, in any fiber composition. Materials that are not, or insufficiently, suitable for the fold recovery test can be assessed for wrinkle recovery. Precision milled spiral column ensures even deformation of the test sample. Comes standard with a set of five weights. As an option, 3-D replicas or standard photos are available for assessment of the test results.
-
The Wascator CLS meets the existing European requirements for textile washing tests. The machine is used by test labs and has been approved by major European retailers, proving the quality and reliability of this machine. On delivery, the machine is pre-programmed for EN ISO 6330:2000, EN 26330: 1993 and ISO 6330: 1984. M&S and other programs are supplied on a locked memory card. Additional programs may be provided by James Heal, or may be optionally created by the user. Most important features: The water level can be determined by setting the desired level, or the water weight in the drum. The drum is suspended in the machine, eliminating the need for special equipment for machine mounting.
-
Burst pressure and material fatigue tester. Including the functionality of 3D material fatigue, fully pneumatically controlled. Exceeds the standard specifications of ISO 13.938-2, ASTM D3786 and many other national and international standards. The distinctive flexibility of this burst pressure testing device provides the ability to test a wide variety of materials including textiles, nonwovens, paper, cardboard, plastics and medical products.
-
Contact heat test device, for testing color fastness, sublimation and thermal stability (shrinkage) Most important features: Flexibility - supports many customer-specific and international standards. Uni controller - for quick and easy operation. Optimally safe - stay cool housing and temperature alarm light for user safety. Precise temperature control - top and bottom plate independently adjustable, with an accuracy of ±1°C. Digital timer - adjustable per second up to 1 minute and then per 5 seconds up to 5 minutes. Starts automatically when the top plate is closed.
-
The test results are clearly displayed on the built-in control panel. This panel shows all essential test parameters, such as the test speed, the force and the load. QuickTest can be set to automatically return to the starting position. This makes it easy to program repeats. This feature reduces setup time, giving operators the ability to run the same test cycle a total of 9999 times before having to re-enter settings.
-
Mace Snag Tester, in accordance with ASTM D3939(Mace, JIS L 1058 and VDA 230-220 standards During the development of the ProMace, the aim was to achieve optimum safety, efficiency, high accuracy and repeatability of the test results. This Mace Snag Tester offers significant benefits to the user. These include specific design elements to minimize pin damage, intuitive controls for compliance with standards, and above all, features for user-safe operation and work method.
-
Testing of phenolic yellowing, or color fastness in contact with perspiration, water and seawater. The perspirometer test is used to test color fastness of textiles to contact with perspiration, water and seawater, and to predict phenolic yellowing of white or pastel colored textiles. A package of test pieces, separated by acrylic or glass slides, is clamped under a prescribed pressure. The test pieces are then placed in an incubator according to a prescribed time and temperature. Then the results are assessed.
-
Testing flame resistance. Various attachments for vertical testing on flame-resistant textiles and small toys. Can also be equipped with a radiation source for testing according to EN 13772. Measurement of the vertical flame propagation in curtain textiles due to the heat released during a developing fire Most important features: Extensive library of pre-programmed EN, ISO and BS standards. Programming function for own tests. Optional radiation source for EN 13772. Range of interchangeable test frames and burners. Automatic flame ignition and sample ignition. Optional test room, specially designed for the Flexiburn. 18 months warranty UKAS accredited calibration for Flexiburn, test frames and burners.
-
Tester for both pilling and snagging. The pilling test is according to ISO 12945-1 and M&S test methods. Snagging is unwanted looping or snagging on the surface of garments due to contact with sharp objects. The basic device for the pilling test, snagging test or snag pod is available with 2 or 4 test positions. Most important features: Individual counter per test position Counter adjustable for checking the life of the cork plates User-friendly and solid design Test options of your choice, Pilling Boxes (ISO), Drums (M&S) or SnagPods for snagging The Snagpod has been developed with leading retailers and independent testing institutes. Click here for more details. Visual assessment equipment and accessories also available Multiple speeds, with reverse option
-
The crease recovery tester, or "crease recovery tester", is used to measure the angle recovery of a crease angle made with a prescribed pressure in a sample after a given time. Stainless Steel Construction Laser Engraved Rotary Scale Fixed target for error-free measurements Auxiliary device with provision for different weights to meet both European and American standards.
-
Retratech, for a complete characterization of the processing properties of thermal shrink film, strength and percentage of shrinkage (PE, PET, PVC, PP, etc.) The Retratech is used by producers of plastics and shrink film and by large consumers of shrink film. The Retratech is available with 2 or 4 test stations.
-
This economically priced Melt Flow Index Tester provides a complete solution for quick and easy determination of Melt Volume Rate and Melt Flow Rate, procedure A and B in accordance with ISO 1133 and ASTM D 1238 and comparable standards. Ideally suited for quality control in production environment, on raw materials, recycled products, etc.
-
The HDT-Vicat tester is designed for simple and independent testing of plastics, according to the mentioned standards. Operation requires little training. The device allows the measurement of changes in the stiffness of a material (polymer, composite, ...) at elevated temperature levels. Also the performance of different materials can be compared on criteria of the mechanical strength of the temperature. This instrument is primarily an instrument of control, performing HDT or Vicat tests, simply by changing some accessories.
-
This Hot Set Tester provides standard conditions for performing hot set tests on the cable sheath material according to IEC 811-2-1. Temperature loss is limited by introducing the samples through a small opening in the top of the oven. The sample holder is placed at working height and the servomotor driven screw system takes the samples in and out of the oven. With the adjustable flow meter, the number of air changes and the low air speed are set, according to the specifications for aging ovens as in the standard IEC 811. The measurements are made with a laser pointer on a measuring scale mounted in front of the window window. The window can be disassembled for cleaning. By means of a push button, the strain measurements are registered and transferred to a template in Excel. The hot set value is measured outside the oven with a digital caliper and also exported to the Excel template. The test report can then also be created in Excel. The delivery of the Hot Set Tester includes the computer and clamps and weights for 8 samples.
-
Fogging test according to ISO 6452, ASTM D5393, DIN, VOLVO, and other specific standards for fogging testing. This compact device has a cooling and heating bath in one housing. There is a choice of two cooling systems: EB 03, Tap water cooling, the water temperature must not exceed 18°C for this. EB 03C, Built-in Peltier cooling elements The EB 03 comes with a standard package of accessories. A complete overview of these and the optional accessories can be found in the brochure.
-
Tube furnace, for determination of Carbon Black and ash content in polymers. This tube furnace is designed for material testing according to standardized test methods for rubber and plastics. The maximum temperature is 950 °C. Some characteristic specifications include overheating protection, a drying tube, flow meters, rinsing bottles and five quartz glass test tubes. This lightweight oven requires a workspace of W x D x H (mm) = 1350 x 275 x 355.
-
The C-Therm Tx uses the patented Modified Transient Plane Source (MTPS) technology. The one-sided heat sensor applies an instantaneous constant heat source to the sample. Thermal conductivity and effusivity are measured directly, providing a detailed overview of the thermal properties of the sample.
-
The C-Therm Tx uses the patented Modified Transient Plane Source (MTPS) technology. The one-sided heat sensor applies an instantaneous constant heat source to the sample. Thermal conductivity and effusivity are measured directly, providing a detailed overview of the thermal properties of the sample.
-
The Textest, FlexAir, is a portable instrument for measuring air permeability, both in the laboratory and on site. It is particularly suitable for measurements on contaminated material, such as used filters. Special features: Compact, lightweight design Portable, ideally suited for on-site measurements Works on battery Automatic test pressure control Measuring head is mounted on a hose of 150cm length Optional PC evaluation software
-
The Portair is the first and only portable instrument for point or profile measurement of air permeability. Special Features: Wide measuring range. AP: approx. 0.2-1,000 ft³/ft²/min (approx. 1-5,000 l/m²/s), thickness: 0-6mm. The instrument is suitable for both spot and profile measurements. High measurement accuracy High measuring speed up to 200 m / min. (!) High resolution of up to 1mm test point pitch. Lightweight portable instrument, suitable for one-handed operation, even overhead. Touch screen for digital and graphical display of test results. One of a kind worldwide. Operates to all leading testing standards. Calibratable.
-
Also for mouth caps testing according to EN 14683, Annex C. The calculation (pressure drop in Pa divided by 4.9) must be performed manually. The Textest, MinAir, for measurements of air permeability and pressure drop. For use as a lab device but also for measurements on location. The Minair operates in accordance with ASTM D 737, DIN 53887, EN ISO 9237, WSP 70.1 and many other national and international testing standards.
-
This thickness measuring device combines all the functions of the DM 2010, with the automatic transport of the sample material. The transport speed and sample length are adjustable.
-
Alternative to the thickness measuring device, DM 2010. Equipped with a measuring unit with LCD, instead of the illuminated, menu-driven touch-screen. This thickness gauge has a segmented display and individual control keys. Of course there is a data output for the digital processing of the measurement results. The DM 2005 model is also available with the options: - Adjustable measuring time - Selectable measuring range
-
The specifications of this thickness gauge are the same as the DM 2005. The exception is the manually operated foot movement instead of a motor-driven transport. The stability of the speed of the foot movement is controlled by a delay in the transmission of the control lever.
-
This thickness measuring device has been used in laboratories all over the world for decades. The depth of measurement, foot shape and test pressure are configured to test materials in accordance with the respective specifications of the applicable ISO, EN and DIN standards. This hand-held thickness gauge has an interface for digital processing of the measurement data.
-
Thickness measuring device based on the model DM 2000 with a measuring foot especially for thickness measurement of geotextiles and geosynthetics. By adding additional weights, the thickness can be measured with different pressure values, as prescribed in the standard EN ISO 9863-1: 2005. The figure shows the device with additional weights for measuring at a pressure of 200 kPa.
-
Durometer hardness system provides hardness measurements on elastomers and plastics with a sample thicker than 6 mm according to IRHD and Durometer hardness. It complies with international standards DIN ISO 48, ISO 48, ASTM D 1415 and DIN 53505. Available inserts for IRHD: * Ball 2.5mm (IRHD N) * Bullet 5.0mm (IRHD L) * Bullet 1.0mm (IRHD H) * Insert Durometer A You can insert the inserts into the measuring head without tools. An electronic identification of each insert is located in the measuring head. The corresponding software for each insert is set automatically. You cannot confuse the inserts. Therefore, this system eliminates operator errors. The patented IRHD N, H, L / Durometer Hardness System works fully automatically with a PC and the Hildebrand software. The software controls the operation of the system. It works under MS-Windows and offers unique functions. Hardness value, graph, statistics, test report are just some features of this software. An ASCII output file is provided. The modular construction makes it possible to change the measuring head. An additional measuring head "MICRO IRHD" is available. In addition, various accessories are available: Test Blocks MACRO IRHD X-Table centering aid Prism centering aid Platform for IRHD
-
The MICRO IRHD SYSTEM is a hardness testing machine. This system eliminates user errors during testing through automation. Samples are placed on the support table. The table is automatically placed under the measuring head. After placing the weights, the degree of penetration is digitally measured after 30 seconds and converted into MICRO IRHD UNITS. The Hildebrand MICRO IRHD software monitors and controls the operation of the system. The software works under Windows and offers unique functions. The hardness value, graph, statistics and the test report are just a few features of this software. All data is sent to the IRHD controller, which is connected to your computer. Specifactions: IRHD unit: Ø 200mm x 470mm Controller: 290mm x 260mm x 75mm Net weight: 17.5 kg Max. sample thickness: 90mm (without Center Device) Resolution: 0.1 IRHD Various accessories are available: O-Ring Centering Aid Rubber test blocks Centering aid with sample holder X-Table centering aid Prism centering aid Platform for IRHD
-
The Hildebrand Digital Durometer Model HDD-2 is the latest innovation for checking the hardness of rubber, plastic and other non-metallic surfaces. The Durometer complies with DIN ISO 7619, ISO 868, ISO 7619 and ASTM D 2240. Characteristics: Superior Accuracy Ergonomic design Large LCD screen Time setting from 1 to 99 s Resolution 0.1 AUTO-OFF function HOLD function Low battery warning Data Port: Opto-RS 232 Connected directly to your PC for data transfer to Hildebrand HilMeasure Software Compliant with DIN, ISO and ASTM standards Batteries: 3.6V size 1/2 AA The HDD-2 model is designed for portable applications or for use with our operating standard OS-2 and OS-3. Available accessories: HilMeasure Software Operating Mode Model OS-2 Operating Mode Model OS-3 Adjusting Disk Kit Test blocks A/D/OO
-
Durometer Model HD3000 is the standard model. The meter has a completely non-reflective dial (Readable per 1/2 point). The durometer complies with DIN ISO 7619, ISO 868, ISO 7619 and ASTM D 2240. Model HD3000 offers maximum accuracy at minimum cost. Characteristics: Compliant with DIN, ISO and ASTM standards Tow pointer available Large Dial Full 360° Dial Superior 1/2 point accuracy Ergonomic design Model HD3000 is designed for manual operation or for use in conjunction with the Hildebrand operating standard OS-2. Available accessories: Operating Mode Model OS-2 Operating Mode Model OS-2-OO DuroLifter Model OS-3 Adjusting Disk Kit Test Blocks A/D
-
Near Infrared Spectroscopy (NIR) is a fast, non-contact and highly accurate detection method for analyzing almost all plastics in solid, film, granulate or powder form. The technology can be applied mobile, in the lab and online in production for automatic separation. The measurement takes less than one second and operation is easy via the color touchscreen.
-
The sIRoPAD is the first and only Near Infrared measurement system worldwide for the detection of the composition of plastic samples directly from production or from a recycling process. This system is the ideal solution for the control of impurities and contaminants of PET flakes or the detection of the composition of other thermoplastic mixtures. The sIRoPAD scans the samples distributed on the reflection plate in a continuous run, measures and saves the results as a complete file with all information or as Excel files via USB or WLAN on the PC.
-
HYP XX, A series of compact hydraulic punching machines, executed in a solid casting construction, capacity up to 100kN. These easy-to-operate die cutting machines are ideally suited for cutting test and material samples. Applications include metal, rubber, plastics, leather, and components for electrical or toy products.
-
Drilling tools for cutting test pieces for pressure and wear tests. The blades are made of hardened steel. They are placed in a stationary drill and used in combination with a soft cutting substrate and ethanol or propanol as a lubricant.
-
Cutting device for sample incision according to ISO 34 methods B and C.
-
A range of standard-compliant or customer-specific dies. Available with a suitable coupling for our die-cutting machines, type EP 02 and EP 08, or your own die-cutting machine of any other brand. The blades are made of hardened steel and have a spring-loaded ejector mechanism. A guarantee for a perfect standard-compliant cutting quality and an efficient preparation of your test samples.
-
Compact pneumatic sample die, for rubber and plastic materials. Capacity up to 25kN, for preparation of test samples in the laboratory. With this punching machine you can choose from a range of standard-compliant or customer-specific punching knives. The machine is equipped with a quick coupling system for the blades.
-
Lever punch, for cutting rubber and plastic material, samples, shapes, etc. Capacity up to 10kN. With this punching machine you can choose from a range of standard-compliant or customer-specific punching knives. The machine is equipped with a quick coupling system, which makes it easy to change the blades.
-
Circular cutting blades, for safe, fast and accurate cutting of round samples with a given diameter or surface, and up to a thickness of 5mm. Suitable for a variety of materials, including foil, paper, cardboard, foam, textile, non-woven and carpet. The test samples are weighed to determine the weight per unit area, but are also used as test samples for water column tests, wear and pilling tests, etc.
-
TensileMill CNC MINI - Compacte machine voor voorbereiding van vlakke en licht gebogen trekproefmonsters. De schijnbare "grootte" van het apparaat is misleidend. Deze machine is specifiek ontworpen voor de ultieme flexibiliteit bij het voorbereiden van trekproefmonsters en voor volledige CNC-bewerkingsmogelijkheden. Een kleine footprint, grote tafelafmetingen, extra vermogen en hoge precisie en herhaalbaarheid, voor een attractieve prijs.
-
Elmendorf tester. Test device for tear resistance of paper, textile, film, foil. Microprocessor controlled, with digital display. According to the Elmendorf test method, up to a pendulum impact force of 30,000 cN, for e.g. geotextiles, fiber reinforced materials. Option: LABODATA III software program.
-
Falling dart impact test. A traditional method for evaluating the penetration resistance and toughness of a plastic film. This test uses a bullet-shaped drop body that falls from a specified height onto the sample material. During the test, the weight of the falling body is increased. The test results can be used for quality control or evaluation of material behavior in field use.
-
Cette étuve de vieillaThis accelerated aging test oven has 4 compartments, the temperature of which can be individually controlled. Each compartment accommodates a sample holder for 24 test samples. This oven also complies with ISO 188 method A, IEC 811 and technically equivalent standards. This aging test oven offers test conditions with very low temperature variation in time and space, low air velocity and controlled air exchange rate.issement accéléré comporte 4 compartiments dont la température peut être contrôlée individuellement. Chaque compartiment accueille un porte-échantillon pour 24 échantillons de test. Ce four est également conforme à la norme ISO 188 méthode A, CEI 811 et aux normes techniquement équivalentes. Cette étuve de vieillissement offre des conditions de test avec une très faible variation de température dans le temps et dans l'espace, une faible vitesse d'air et un taux de renouvellement d'air maîtrisé.
-
The Coup Test has been developed for testing the cut resistance on safety clothing, e.g. work gloves, in accordance with the standard EN 388:2016. In addition, it can also be used for R&D purposes on other products or materials. The design of the Couptest has recently been updated to meet the latest requirements regarding safety, ergonomics and the reproducibility of the test results.
-
The Hildebrand Densimeter Model H-300 S is a cost-effective density calculation instrument with a superior accuracy of 0.001. The system is suitable for checking plastics, rubber, films, liquids, sintered metals, ceramics, glass and other non-metallic materials. The value is automatically displayed after the set time has elapsed. The measurement data can also be viewed (and exported) via the optional software. Characteristics: Density Resolution: 0.001g/cm3 Range: 0.01 to 300 g Easy to control Automatic density calculation Water temperature compensation Able to measure floating sample in water The volume of solid materials is measured Specifications: 190mm x 218mm x 170mm Weight: 1.54 kg
