-
Household tumble dryers do not consider the requirements of a textile testing laboratory. For obvious reasons are the variations in the performance of the different models and brands. The consistency and reproducibility of the set values, such as time and temperature, are also not checked. In response to these challenges, James Heal developed the Accudry. An air-ventilated, reversing dryer, which keeps machine variables and operating errors to an absolute minimum. The Accudry meets the current European requirements for tumble dryers in textile test laboratories. Most important features:
- Guaranteed in accordance with the standards
- Multilingual control panel
- Precise control of heating and cooling periods
- Precise control of the outlet air temperature
- Dual filter system
- Robust and long-lasting
- Service and calibration facilities available
-
The AquAbrasion is an accurate and repeatable way to perform wet wear testing, which we have proven to be a critical and often damaging step in determining the durability of outdoor wear. Deionized water can be used to replicate rain, or a sweat solution can be used to replicate sweat. Fabrics exposed to wet conditions are found to wear more strongly than when subjected to the same abrasive stresses under dry conditions circumstances.
-
The “blue wools”, or blue wool standards, are used in the testing of lightfastness, for example in Xenon test equipment. These ISO standards (ISO 105 B08) are from the DEK (Deutsche Echtheitskommission). The DEK is the leading standard for Blue Wools worldwide, and every batch produced is checked for compliance with this standard before release. If desired, the comparative test results are available.
-
Circular cutting blades, for safe, fast and accurate cutting of round samples with a given diameter or surface, and up to a thickness of 5mm. Suitable for a variety of materials, including foil, paper, cardboard, foam, textile, non-woven and carpet. The test samples are weighed to determine the weight per unit area, but are also used as test samples for water column tests, wear and pilling tests, etc.
-
The crease recovery tester, or "crease recovery tester", is used to measure the angle recovery of a crease angle made with a prescribed pressure in a sample after a given time. Stainless Steel Construction Laser Engraved Rotary Scale Fixed target for error-free measurements Auxiliary device with provision for different weights to meet both European and American standards.
-
For rubbing tests to check color fastness. In addition to textiles, the Crockmeter is used to measure color fastness to friction on carpet, laminate and printed matter, as well as the microscratch resistance of lacquers, coatings and painted surfaces. If you have a special application, please get in touch to discuss the possibilities with us.
- smoothly working, due to precisely designed mechanism. Adjustable digital return counter.
- guaranteed accuracy of test pressure and stroke length
- sample clamp in polycarbonate. In accordance with, among others, EN ISO 105 X12, AATCC 8 and Marks and Spencer C8 Also available in manual version for standard testing.
-
Accelerated washing tests for wear behavior of clothing. Several properties can be tested, such as the durability of prints or flakes, shrinkage differences in the same surface, wrinkling, puckering, etc. The Dynawash has two versions, with and without an integrated centrifuge. Both machines are operated via the intuitive touch screen which makes it easy to set temperature and time cycles.
-
Crack test, digital Elmendorf. Versatile and powerful. Meets all standards for tear testing of textiles, paper, non-woven and plastic film and foil. This Elmendorf, has a contemporary styling and offers a wide range of new functions that offer real advantages, such as reliable test results, high accuracy, safety and flexibility.
-
Testing flame resistance. Various attachments for vertical testing on flame-resistant textiles and small toys. Can also be equipped with a radiation source for testing according to EN 13772. Measurement of the vertical flame propagation in curtain textiles due to the heat released during a developing fire Most important features: Extensive library of pre-programmed EN, ISO and BS standards. Programming function for own tests. Optional radiation source for EN 13772. Range of interchangeable test frames and burners. Automatic flame ignition and sample ignition. Optional test room, specially designed for the Flexiburn. 18 months warranty UKAS accredited calibration for Flexiburn, test frames and burners.
-
Cup washing machine for color fastness testing. This cup washing machine is used for evaluation of color fastness of textiles and leather, for dry cleaning and washing in standardized soap liquid, chlorinated water, etc. The Gyrowash 815, cup washing machines confirm everything that is synonymous with James Heal instruments: innovative engineering, versatility, ease of use, affordability and last but not least, longevity. Within the Gyrowash range there are 2 models, with the flexibility for small and large sample cups: Gyrowash 815/8 - 1 bath With a maximum capacity of 8 large or 8 small test cups. The most affordable single bath Gyrowash. Ideal for laboratories performing low-volume wash and dry cleaning tests for color fastness to European and American standards. Gyrowash 815/20 - 1 bath An officially recognized AATCC test instrument (AATCC Test Method 61.) The horizontal rotor accommodates five test cups on each of the four sides. So a maximum capacity of 20 large (1200ml) or 20 small (500ml) cups, or a combination of these.
-
The circular motion of the machine creates multi-directional scratches, making the results more representative of the actual end use than other methods in the market, which only scratch in a straight line. This test move is also suitable for testing according to EN 438-2:2016, CEN/TS 16611:2016 and IKEA
-
Tester for both pilling and snagging. The pilling test is according to ISO 12945-1 and M&S test methods. Snagging is unwanted looping or snagging on the surface of garments due to contact with sharp objects. The basic device for the pilling test, snagging test or snag pod is available with 2 or 4 test positions. Most important features: Individual counter per test position Counter adjustable for checking the life of the cork plates User-friendly and solid design Test options of your choice, Pilling Boxes (ISO), Drums (M&S) or SnagPods for snagging The Snagpod has been developed with leading retailers and independent testing institutes. Click here for more details. Visual assessment equipment and accessories also available Multiple speeds, with reverse option
-
Testing of phenolic yellowing, or color fastness in contact with perspiration, water and seawater. The perspirometer test is used to test color fastness of textiles to contact with perspiration, water and seawater, and to predict phenolic yellowing of white or pastel colored textiles. A package of test pieces, separated by acrylic or glass slides, is clamped under a prescribed pressure. The test pieces are then placed in an incubator according to a prescribed time and temperature. Then the results are assessed.
-
ProDry provides insight into evaporation and how garments such as active wear dry when they have become damp due to rain and perspiration. ProDry reproduces the conditions to check that quick-drying fabrics are performing effectively. ProDry provides insight into evaporation and how garments such as active wear dry when they have become damp due to rain and perspiration. ProDry reproduces the conditions to check that the quick-drying fabrics are performing effectively. The software with pre-programmed parameters automatically recognizes the end point of the test and calculates the test results. During the test, test values are displayed progressively and in real time on the screen. In addition, more measurement points can be added to the results, which contributes to a higher accuracy and consistency of the test results. With the adjustable temperature sensor, the AATCC standard is met regardless of the thickness of the test material.
-
Mace Snag Tester, in accordance with ASTM D3939(Mace, JIS L 1058 and VDA 230-220 standards During the development of the ProMace, the aim was to achieve optimum safety, efficiency, high accuracy and repeatability of the test results. This Mace Snag Tester offers significant benefits to the user. These include specific design elements to minimize pin damage, intuitive controls for compliance with standards, and above all, features for user-safe operation and work method.
-
The test results are clearly displayed on the built-in control panel. This panel shows all essential test parameters, such as the test speed, the force and the load. QuickTest can be set to automatically return to the starting position. This makes it easy to program repeats. This feature reduces setup time, giving operators the ability to run the same test cycle a total of 9999 times before having to re-enter settings.
-
Contact heat test device, for testing color fastness, sublimation and thermal stability (shrinkage) Most important features: Flexibility - supports many customer-specific and international standards. Uni controller - for quick and easy operation. Optimally safe - stay cool housing and temperature alarm light for user safety. Precise temperature control - top and bottom plate independently adjustable, with an accuracy of ±1°C. Digital timer - adjustable per second up to 1 minute and then per 5 seconds up to 5 minutes. Starts automatically when the top plate is closed.
-
Specially designed for testing textiles, non-woven and leather in various forms: yarns, fabrics, clothing and the safety of accessories. The combination of technical innovation and intuitive contributions from users has led to the realization of this user-friendly test device. With the intelligent and easy to use "TestWise" software you can get started with 3 clicks. The extensive library of test routines, together with the wide variety of clamps and grippers, make it possible to test according to a large number of international and customer-specific standards. A few features: Wide range of clamping tools for custom and standard test routines Rapid change of clamping pieces and power cells Testwise software with an extensive file of pre-programmed test methods
-
Burst pressure and material fatigue tester. Including the functionality of 3D material fatigue, fully pneumatically controlled. Exceeds the standard specifications of ISO 13.938-2, ASTM D3786 and many other national and international standards. The distinctive flexibility of this burst pressure testing device provides the ability to test a wide variety of materials including textiles, nonwovens, paper, cardboard, plastics and medical products.
-
TruRain is an automated and programmable rain simulator. This determines to what extent textile repels water. In short: It is the ultimate Bundesmann tester. Designed with precision in mind to reduce inconsistency and improve results accuracy. Big advantage over existing Bundesmann testers? TruRain has an automatic 'Shower guard'. This keeps the person performing the test always dry when inserting and removing the test heads. These test heads can be easily removed individually (which was not possible until now), so you also need less space for the set up !. In addition, the TestWise software is very user-friendly, it partly automates the test process and warns the user based on the set ISO standard.
-
The Wascator CLS meets the existing European requirements for textile washing tests. The machine is used by test labs and has been approved by major European retailers, proving the quality and reliability of this machine. On delivery, the machine is pre-programmed for EN ISO 6330:2000, EN 26330: 1993 and ISO 6330: 1984. M&S and other programs are supplied on a locked memory card. Additional programs may be provided by James Heal, or may be optionally created by the user. Most important features: The water level can be determined by setting the desired level, or the water weight in the drum. The drum is suspended in the machine, eliminating the need for special equipment for machine mounting.
-
WickView is a state-of-the-art measuring instrument for tracking and registering moisture transport in a garment. The advanced imaging system provides a good picture of moisture absorption and drainage, and as such, the effectiveness of these properties in a garment can be determined. The ability to rotate samples in both vertical and horizontal position faithfully simulates the wearing of clothing on the body.
-
Wrinkle Recovery Tester or Wrinkle Recovery Tester Determination of wrinkling behavior of textiles. The test sample is wrinkled by a standard method. Different weights are used for this. Test for both fabrics and knits, in any fiber composition. Materials that are not, or insufficiently, suitable for the fold recovery test can be assessed for wrinkle recovery. Precision milled spiral column ensures even deformation of the test sample. Comes standard with a set of five weights. As an option, 3-D replicas or standard photos are available for assessment of the test results.
-
Crockmeter, rub test Crockmeter, for rubbing tests, dry and wet, to check color fastness. In addition to textiles, the Crockmeter is used for color fastness, rubbing tests on carpet, laminate wallpaper and printed matter. Also for microscratch resistance of lacquers, coatings and painted surfaces. If you have a special application, please get in touch to discuss the possibilities with us.
- smoothly working, due to precisely designed mechanism.
- built-in digital counter with battery power.
- guaranteed accuracy of test pressure and stroke length
- sample clamp in polycarbonate, easy to install
- in accordance with, among others, EN ISO 105 X12, AATCC 8 and Marks and Spencer C8 Also available in version with motor drive for endurance tests.
-
CHARACTERIZED BY SIMPLICITY….
- Ergonomic design.
- Operation with minimum skill level.
- Pre-programmed test routines.
- Changing test material is a second's work.
- 3-sided holders for test material.
- Attachments for quick assessment of test results.
- Xenon lamp installation without tools.
- Accessible water tank of 32 liters, or direct connection to existing purified water system.
