-
This cabinet oven for aging tests features excellent temperature stability and air distribution, which is controlled by the controlled airflow. The test oven is available in 60 and 120 liters. The EB 10-II is ideal for aging testing with finished products and large test samples, which are not suitable for testing in a cell oven. Both shelves and rods are included, so that practically all sample types can be tested.
-
Cette étuve de vieillaThis accelerated aging test oven has 4 compartments, the temperature of which can be individually controlled. Each compartment accommodates a sample holder for 24 test samples. This oven also complies with ISO 188 method A, IEC 811 and technically equivalent standards. This aging test oven offers test conditions with very low temperature variation in time and space, low air velocity and controlled air exchange rate.issement accéléré comporte 4 compartiments dont la température peut être contrôlée individuellement. Chaque compartiment accueille un porte-échantillon pour 24 échantillons de test. Ce four est également conforme à la norme ISO 188 méthode A, CEI 811 et aux normes techniquement équivalentes. Cette étuve de vieillissement offre des conditions de test avec une très faible variation de température dans le temps et dans l'espace, une faible vitesse d'air et un taux de renouvellement d'air maîtrisé.
-
Cell oven for life and aging testing of rubber and plastics in strictly controlled conditions. The EB 01 complies with the specifications described in the standards, ISO 188, ISO 3383, IEC 811 and technically equivalent standards. The EB 01 Cell oven has 4 cells with individually adjustable air exchange.
-
Pressure test device. PC controlled, for stress relaxation measurements, specially designed for discontinuous measurements on rubber in accordance with ISO 3384 method B and standard pressure testing
-
Cabinet oven, type EB 04-II, with aging test device. Meets the specifications of, ISO 188, IEC 811 and technically equivalent standards. This aging test oven offers test conditions such as very small temperature variation in time and space, low air velocity and controlled air exchange rate. For this, the oven is equipped with an inner chamber with a controlled air speed. The EB 04 is ideal for aging testing of finished products and large test samples, which do not fit in the cell ovens. Delivery includes shelves and rods for testing practically any type of sample.
-
Rubber aging tests in air and liquids.
Aging tests for rubber and elastomers. Large capacity, 3 samples can be tested in each of the 24 test tubes. High temperature accuracy Temperature range: + 40 ° C to + 200 ° C (EB 11) + 40 ° C to + 300 ° C (EB 11HT) A few features:- Aging tests in air and liquids.
- Temperature stability in time and space, ± 0.25 ° C
- Temperature control by sensor in test tube
- Temperature control accuracy, 0.1 ° C
- Power failure recording.
-
EV 03, compression set, according to ISO 815. The set consists of 2 round polished stainless steel discs with a central screw and spacer. Minimum number of components for easy sample placement. Spacers for large and small samples are included. A set of spacers from 1 to 20 mm in 0.5 mm steps is available as an option.
-
A range of standard-compliant or customer-specific dies. Available with a suitable coupling for our die-cutting machines, type EP 02 and EP 08, or your own die-cutting machine of any other brand. The blades are made of hardened steel and have a spring-loaded ejector mechanism. A guarantee for a perfect standard-compliant cutting quality and an efficient preparation of your test samples.
-
Drilling tools for cutting test pieces for pressure and wear tests. The blades are made of hardened steel. They are placed in a stationary drill and used in combination with a soft cutting substrate and ethanol or propanol as a lubricant.
-
Easy and time-saving. During assembly of the samples for aging tests in a cell oven, this standard offers many advantages. Place the sample holder in the stand, and you have both hands free to place up to 24 samples.
-
Electrical resistance measurement according to ISO 2878. For conductive and antistatic rubber products. This instrument has a battery-powered megaohm meter, which measures test voltages from 250 VDC to 1000 VDC, using insulated stainless steel electrodes. Includes pen with conductive silver paint and 1 liter of conductive liquid.
-
Elongation test, according to ISO 2285. This stainless steel set can be set for 25% to 100% elongation and is easy to place in the sample holder of the cell ovens.
-
Fogging test according to ISO 6452, ASTM D5393, DIN, VOLVO, and other specific standards for fogging testing. This compact device has a cooling and heating bath in one housing. There is a choice of two cooling systems: EB 03, Tap water cooling, the water temperature must not exceed 18°C for this. EB 03C, Built-in Peltier cooling elements The EB 03 comes with a standard package of accessories. A complete overview of these and the optional accessories can be found in the brochure.
-
Gehman tester, computer controlled with 6 test stations. The Gehman test is performed according to ISO 1432, ASTM D1053 method A, or technically comparable standards. The computer monitors both the liquid heating and the measurement of the torsion angle of the samples. The results are graphed and the RM2, RM5, RM10 and RM100 values are calculated. The results can also be shown in a table. Vessels for storage of liquid nitrogen in the laboratory are available as an option.
-
Heat aging tests according to ISO 188 method B, and ISO 4577. Oven with high air speed and with a laminar air flow from bottom to top. An error of 1°C in temperature corresponds to approximately 10% error in test time, so temperature accuracy is very important for heat aging testing.
-
Heat aging testing of rubber in liquids and air This tube furnace has four compartments for simultaneous testing in different temperatures. Capacity, 6 test tubes per cell. High Temperature Accuracy Temperature range: + 40 °C to + 200 °C (EB 11) + 40 °C to + 300 °C (EB 11HT) A few features: Testing in liquids and air. Temperature stability in time and space, ± 0.25 °C Temperature control by sensor in test tube Temperature control accuracy, 0.1 °C Display in case of power failure.
-
This Hot Set Tester provides standard conditions for performing hot set tests on the cable sheath material according to IEC 811-2-1. Temperature loss is limited by introducing the samples through a small opening in the top of the oven. The sample holder is placed at working height and the servomotor driven screw system takes the samples in and out of the oven. With the adjustable flow meter, the number of air changes and the low air speed are set, according to the specifications for aging ovens as in the standard IEC 811. The measurements are made with a laser pointer on a measuring scale mounted in front of the window window. The window can be disassembled for cleaning. By means of a push button, the strain measurements are registered and transferred to a template in Excel. The hot set value is measured outside the oven with a digital caliper and also exported to the Excel template. The test report can then also be created in Excel. The delivery of the Hot Set Tester includes the computer and clamps and weights for 8 samples.
-
Lever punch, for cutting rubber and plastic material, samples, shapes, etc. Capacity up to 10kN. With this punching machine you can choose from a range of standard-compliant or customer-specific punching knives. The machine is equipped with a quick coupling system, which makes it easy to change the blades.
-
Cutting device for sample incision according to ISO 34 methods B and C.
-
Compact pneumatic sample die, for rubber and plastic materials. Capacity up to 25kN, for preparation of test samples in the laboratory. With this punching machine you can choose from a range of standard-compliant or customer-specific punching knives. The machine is equipped with a quick coupling system for the blades.
-
Airtight container for testing in liquids. This container is used in combination with the test frame EB 02 and is suitable for a pressure of up to 3 Bar. For example, samples in coolants can be tested under pressure. When testing in volatile substances, evaporation is prevented, reducing the risks of explosion. The container is equipped with a safety valve, which is set at approximately 3 Bar.
-
Temperature cabinet for testing in a standard ambient temperature of 23ºC, ±0.5ºC. Up to 4 test frames can be placed in the cabinet.
-
For stress relaxation tests in a temperature range up to 200 ° C, or optionally up to 300 ° C, the test frames are used in combination with the cell ovens. Options such as multiple samples in one temperature, as well as in different temperatures, are available. Various rigs for testing in pull and push force, and in air or in liquids.
-
TR tester with automated test procedure. After cooling the liquid, the computer monitors the heating and measures the change in length of the samples. The result is displayed as TR10, TR30, TR50 and TR70. The result can also be shown in a table with length versus temperature. The test results can be exported to a spreadsheet for graphing. We recommend the use of an automatic liquid nitrogen cooling system.
-
Tube furnace, for determination of Carbon Black and ash content in polymers. This tube furnace is designed for material testing according to standardized test methods for rubber and plastics. The maximum temperature is 950 °C. Some characteristic specifications include overheating protection, a drying tube, flow meters, rinsing bottles and five quartz glass test tubes. This lightweight oven requires a workspace of W x D x H (mm) = 1350 x 275 x 355.
