-
Storage of results - quickly and easily, on a USB stick, without a PC and software. The moisture analysis by means of heating and extraction of moisture is a very accurate method for determining the moisture content of materials. This moisture measurement balance is very user-friendly and competitive in price.
-
Pressure test device. PC controlled, for stress relaxation measurements, specially designed for discontinuous measurements on rubber in accordance with ISO 3384 method B and standard pressure testing
-
Cabinet oven, type EB 04-II, with aging test device. Meets the specifications of, ISO 188, IEC 811 and technically equivalent standards. This aging test oven offers test conditions such as very small temperature variation in time and space, low air velocity and controlled air exchange rate. For this, the oven is equipped with an inner chamber with a controlled air speed. The EB 04 is ideal for aging testing of finished products and large test samples, which do not fit in the cell ovens. Delivery includes shelves and rods for testing practically any type of sample.
-
A range of standard-compliant or customer-specific dies. Available with a suitable coupling for our die-cutting machines, type EP 02 and EP 08, or your own die-cutting machine of any other brand. The blades are made of hardened steel and have a spring-loaded ejector mechanism. A guarantee for a perfect standard-compliant cutting quality and an efficient preparation of your test samples.
-
Easy and time-saving. During assembly of the samples for aging tests in a cell oven, this standard offers many advantages. Place the sample holder in the stand, and you have both hands free to place up to 24 samples.
-
Fogging test according to ISO 6452, ASTM D5393, DIN, VOLVO, and other specific standards for fogging testing. This compact device has a cooling and heating bath in one housing. There is a choice of two cooling systems: EB 03, Tap water cooling, the water temperature must not exceed 18°C for this. EB 03C, Built-in Peltier cooling elements The EB 03 comes with a standard package of accessories. A complete overview of these and the optional accessories can be found in the brochure.
-
Gehman tester, computer controlled with 6 test stations. The Gehman test is performed according to ISO 1432, ASTM D1053 method A, or technically comparable standards. The computer monitors both the liquid heating and the measurement of the torsion angle of the samples. The results are graphed and the RM2, RM5, RM10 and RM100 values are calculated. The results can also be shown in a table. Vessels for storage of liquid nitrogen in the laboratory are available as an option.
-
Heat aging tests according to ISO 188 method B, and ISO 4577. Oven with high air speed and with a laminar air flow from bottom to top. An error of 1°C in temperature corresponds to approximately 10% error in test time, so temperature accuracy is very important for heat aging testing.
-
This Hot Set Tester provides standard conditions for performing hot set tests on the cable sheath material according to IEC 811-2-1. Temperature loss is limited by introducing the samples through a small opening in the top of the oven. The sample holder is placed at working height and the servomotor driven screw system takes the samples in and out of the oven. With the adjustable flow meter, the number of air changes and the low air speed are set, according to the specifications for aging ovens as in the standard IEC 811. The measurements are made with a laser pointer on a measuring scale mounted in front of the window window. The window can be disassembled for cleaning. By means of a push button, the strain measurements are registered and transferred to a template in Excel. The hot set value is measured outside the oven with a digital caliper and also exported to the Excel template. The test report can then also be created in Excel. The delivery of the Hot Set Tester includes the computer and clamps and weights for 8 samples.
-
Lever punch, for cutting rubber and plastic material, samples, shapes, etc. Capacity up to 10kN. With this punching machine you can choose from a range of standard-compliant or customer-specific punching knives. The machine is equipped with a quick coupling system, which makes it easy to change the blades.
-
Cutting device for sample incision according to ISO 34 methods B and C.
-
Compact pneumatic sample die, for rubber and plastic materials. Capacity up to 25kN, for preparation of test samples in the laboratory. With this punching machine you can choose from a range of standard-compliant or customer-specific punching knives. The machine is equipped with a quick coupling system for the blades.
-
Airtight container for testing in liquids. This container is used in combination with the test frame EB 02 and is suitable for a pressure of up to 3 Bar. For example, samples in coolants can be tested under pressure. When testing in volatile substances, evaporation is prevented, reducing the risks of explosion. The container is equipped with a safety valve, which is set at approximately 3 Bar.
-
Temperature cabinet for testing in a standard ambient temperature of 23ºC, ±0.5ºC. Up to 4 test frames can be placed in the cabinet.
-
TR tester with automated test procedure. After cooling the liquid, the computer monitors the heating and measures the change in length of the samples. The result is displayed as TR10, TR30, TR50 and TR70. The result can also be shown in a table with length versus temperature. The test results can be exported to a spreadsheet for graphing. We recommend the use of an automatic liquid nitrogen cooling system.
-
Tube furnace, for determination of Carbon Black and ash content in polymers. This tube furnace is designed for material testing according to standardized test methods for rubber and plastics. The maximum temperature is 950 °C. Some characteristic specifications include overheating protection, a drying tube, flow meters, rinsing bottles and five quartz glass test tubes. This lightweight oven requires a workspace of W x D x H (mm) = 1350 x 275 x 355.
-
The Hildebrand Densimeter Model H-300 S is a cost-effective density calculation instrument with a superior accuracy of 0.001. The system is suitable for checking plastics, rubber, films, liquids, sintered metals, ceramics, glass and other non-metallic materials. The value is automatically displayed after the set time has elapsed. The measurement data can also be viewed (and exported) via the optional software. Characteristics: Density Resolution: 0.001g/cm3 Range: 0.01 to 300 g Easy to control Automatic density calculation Water temperature compensation Able to measure floating sample in water The volume of solid materials is measured Specifications: 190mm x 218mm x 170mm Weight: 1.54 kg
-
HYP XX, A series of compact hydraulic punching machines, executed in a solid casting construction, capacity up to 100kN. These easy-to-operate die cutting machines are ideally suited for cutting test and material samples. Applications include metal, rubber, plastics, leather, and components for electrical or toy products.
-
The IdentiPol QA offers a new measurement technique with which incoming materials can be determined whether they deviate from a reference database. Among other things, melting point, glass transition point and dynamic mechanical properties are screened with this system. The obtained viscoelastic fingerprint of the test sample is compared with the reference database; a deviating sample gets a low QIS score and can thus be easily recognized and rejected. The system includes a standard database. It is also suitable for glass-filled and hygroscopic materials. A granulate grain, powder or piece of product can be taken as a sample. The IdentiPol QA works with English software under Windows XP, VISTA and Windows 7.
-
TensileMill CNC MINI - Compacte machine voor voorbereiding van vlakke en licht gebogen trekproefmonsters. De schijnbare "grootte" van het apparaat is misleidend. Deze machine is specifiek ontworpen voor de ultieme flexibiliteit bij het voorbereiden van trekproefmonsters en voor volledige CNC-bewerkingsmogelijkheden. Een kleine footprint, grote tafelafmetingen, extra vermogen en hoge precisie en herhaalbaarheid, voor een attractieve prijs.
-
Crack test, digital Elmendorf. Versatile and powerful. Meets all standards for tear testing of textiles, paper, non-woven and plastic film and foil. This Elmendorf, has a contemporary styling and offers a wide range of new functions that offer real advantages, such as reliable test results, high accuracy, safety and flexibility.
-
Specially designed for testing textiles, non-woven and leather in various forms: yarns, fabrics, clothing and the safety of accessories. The combination of technical innovation and intuitive contributions from users has led to the realization of this user-friendly test device. With the intelligent and easy to use "TestWise" software you can get started with 3 clicks. The extensive library of test routines, together with the wide variety of clamps and grippers, make it possible to test according to a large number of international and customer-specific standards. A few features: Wide range of clamping tools for custom and standard test routines Rapid change of clamping pieces and power cells Testwise software with an extensive file of pre-programmed test methods
-
Burst pressure and material fatigue tester. Including the functionality of 3D material fatigue, fully pneumatically controlled. Exceeds the standard specifications of ISO 13.938-2, ASTM D3786 and many other national and international standards. The distinctive flexibility of this burst pressure testing device provides the ability to test a wide variety of materials including textiles, nonwovens, paper, cardboard, plastics and medical products.
-
This economically priced Melt Flow Index Tester provides a complete solution for quick and easy determination of Melt Volume Rate and Melt Flow Rate, procedure A and B in accordance with ISO 1133 and ASTM D 1238 and comparable standards. Ideally suited for quality control in production environment, on raw materials, recycled products, etc.
