-
Testing flame resistance. Various attachments for vertical testing on flame-resistant textiles and small toys. Can also be equipped with a radiation source for testing according to EN 13772. Measurement of the vertical flame propagation in curtain textiles due to the heat released during a developing fire Most important features: Extensive library of pre-programmed EN, ISO and BS standards. Programming function for own tests. Optional radiation source for EN 13772. Range of interchangeable test frames and burners. Automatic flame ignition and sample ignition. Optional test room, specially designed for the Flexiburn. 18 months warranty UKAS accredited calibration for Flexiburn, test frames and burners.
-
ProDry provides insight into evaporation and how garments such as active wear dry when they have become damp due to rain and perspiration. ProDry reproduces the conditions to check that quick-drying fabrics are performing effectively. ProDry provides insight into evaporation and how garments such as active wear dry when they have become damp due to rain and perspiration. ProDry reproduces the conditions to check that the quick-drying fabrics are performing effectively. The software with pre-programmed parameters automatically recognizes the end point of the test and calculates the test results. During the test, test values are displayed progressively and in real time on the screen. In addition, more measurement points can be added to the results, which contributes to a higher accuracy and consistency of the test results. With the adjustable temperature sensor, the AATCC standard is met regardless of the thickness of the test material.
-
The Coup Test has been developed for testing the cut resistance on safety clothing, e.g. work gloves, in accordance with the standard EN 388:2016. In addition, it can also be used for R&D purposes on other products or materials. The design of the Couptest has recently been updated to meet the latest requirements regarding safety, ergonomics and the reproducibility of the test results.
-
Also for mouth masks tests according to EN 14683, appendix C. Recently adapted for the fully automatic course of this test. Also for technical textiles. Can be used in the laboratory and the production process. Textest has established itself worldwide with its air permeability measuring equipment. Already 50 years of experience, know-how and development in measurement of air permeability is the basis for this. The Multi-functional Labair IV meets all requirements when it comes to the air permeability of your products.
-
Also for mouth caps testing according to EN 14683, Annex C. The calculation (pressure drop in Pa divided by 4.9) must be performed manually. The Textest, MinAir, for measurements of air permeability and pressure drop. For use as a lab device but also for measurements on location. The Minair operates in accordance with ASTM D 737, DIN 53887, EN ISO 9237, WSP 70.1 and many other national and international testing standards.
-
EN 16603, EN 16604, ASTM F 1670 and ASTM F 1671. Newly developed due to the high demand for testing according to the above standards. With this new instrument, up to six penetration cells can be connected simultaneously. The pressure sequences can be selected according to the standards or they can be freely programmed. In addition, a 100 cm2 test head can be added to perform regular water column tests up to 500 mbar.
-
Measurement of the resistance to permeation of liquids in materials, eg textiles, nonwovens and films (with and without coating). This water column test is easy to perform and provides accurate, reproducible information about the permeability of your materials. Three tests, the dynamic, static and program test mode. Your choice: manual, semi-automatic or - unique worldwide: - fully automatic test procedure without the presence of the operator. Choice between three models: FX 3000-4L PUM, test pressure up to 500 mbar (5 m water column) with built-in pump and mechanical sample clamp. FX 3000-4M, test pressure up to 2,000 mbar (20 m water column) with external compressed air connection and pneumatic sample clamp. FX 3000-4H, test pressure up to 5,000 mbar (50 m water column) with external compressed air connection and pneumatic sample clamp. Characteristic features: Time-saving features, such as adjustable alarm value, automatic program flow during "pass/fail" tests and an optional automatic drop detector. Well lit test area with unobstructed view of the test sample. Quick and easy clamping of the test sample. Touch screen operation with digital and graphic display of the test results and the test sequence. Data transfer: via USB, Ethernet Operates in accordance with all major testing standards. Calibratable. Options: Automatic water level control WLAN for direct access to the network. Integrated software for evaluation and storage of test results in XML format. Integrated strip printer for printing a test report.
-
Applied to materials for heat protective clothing, when exposed to fire. Fully complies with the specifications described in the ISO 9151: 1995 standard. A method of comparing or indexing the heat transfer representative samples of one or more layers of textile or other material for heat protective clothing. Supplied as standard with software for logging the test data in Excel format, or optionally with ArtTest software for standard-compliant calculations and result display.
-
These tests are performed on materials and compositions of materials, intended for heat protective clothing. Method A is used for visual assessment of material change. Method B determines the protection level of a material. One or both of these methods are used for these materials. Supplied as standard with software for logging the test data in Excel format, or optionally with ArtTest software for standard-compliant calculations and result display.
